NOTE: ND2 and ND4 are temporily unavailable. The LED that they used has been discontinued. There does not seem to be an alternative with an inbuilt resistor. We are hoping to source bright-enough LEDs with a red-coloured body, but they will be supplied with an external resistor.
All these include a Red LED for either 5 volts or 12 volts. Round lamps are approx. 12mm diameter x 16mm high. Square lamps are approx. 12 x 12·5 x 16mm high. Both types have a slot for mounting on a bracket. They are usually printed using white ABS.
Tail lights can be supplied with an L19 Warm White LED for £1.00 extra, for use as headlights.
Here are the parts of a round lamp:
Handed, for single or double-ended brake vans. Can also be supplied with hangers equally spaced for fitting centrally, on request. Step is approx. 36mm x 12mm. Hangers are 13mm long.
ND64 Coach Steps – two £3.75 (7/8" £5.65)
Solebar-mounted Leek & Manifold style. Approx.35mm wide, 20mm high x 16.5mm projection (side supports).
ND65 Coach Steps – four £6.95 (7/8" £10.45)
Solebar-mounted Leek & Manifold style. Approx. 35mm wide, 20mm high x 16.5mm projection (side supports)
ND67 Leek & Manifold Style End Fences/Gates £8.05 (7/8" £5.65)
Two sets of "wrought iron" fences and gates. This is narrower than the coach body. Width approx. 67mm, depth (end fence/gate to coach body) 51mm, height approx. 42mm.
One pair of dummy vacuum pipes. Height approx. 46·5mm, from top to bottom of curved part of pipe.
ND96 Handrails for Brake Vans – two £2.80 (7/8" £4.20)
As used on brake vans and other vehicles. Approx 35mm long. Can be made to other lengths, on request (price may vary).
ND97 Brake pipes – two £4.60 (7/8" £6.90)
Cranked type as used on Leek & Manifold coaches. Approx 35mm long.
Wagon and Van Strapping etc.
ND50 22 Small Angle Plates £4.15 (7/8" £6.25)
Assorted T, L and diagonal plates.
The bolt head spacing on ND51-ND53 can be supplied to your spacing on request. Longer lengths can also be supplied (at extra cost) up to 200mm.
ND51 T-section Stanchions (4) £4.15 (7/8" £6.25)
With bolt head detail. Approx. 94mm long x 5·3mm wide.
ND52 L-section Stanchions (4) £4.15 (7/8" £6.25)
With bolt head detail. Approx. 94mm long x 5·3mm wide.
ND53 Flat Strapping (6) £4.15 (7/8" £6.25)
2 "J" ended pieces and 4 straight pieces. With rivet detail. Approx. 94mm long
ND54-ND56 below, have six hinge plates and include 4 end stanchions.
ND54 Set of strapping £5.35 (7/8" £8.05)
For 2 plank dropside wagons. 20mm height above hinge.
ND55 Set of strapping 25mm £5.35 (7/8" £8.05)
For 3 plank dropside wagons. 25mm height above hinge.
ND56 Set of strapping 33mm £5.35 (7/8" £8.05)
For 4 plank dropside wagons. 33mm height above hinge.
ND66 T-section Stanchions £4.15 (7/8" £6.25)
For wagon ends or sides. 4 lengths x 60mm.
ND74 U-section Stanchions £4.15 (7/8" £6.25)
For wagon ends or sides. Regular bolt head spacing. 4 lengths x 94mm.
ND75 U-section Stanchions £3.90
For wagon ends or sides. "Paired" bolt head spacing. 4 lengths x 94mm.
ND76 T-section Stanchions £4.15 (7/8" £6.25)
For wagon ends or sides. 4 lengths x 110mm.
ND86 Pair of End Door Hinges £3.00 (7/8" £4.50)
Dummy hinges for 2 plank end door wagons used on the Corris Railway. Approx. 21mm wide x 26·5mm high (each "half").
ND89 Solebar Brackets and Plates £4.60 (7/8" £6.90)
Two sets of "washer plates", end brackets and number plate (blank). Enough for two solebars – one wagon.
ND90 Van Corner Plates £7.50 (7/8" £11.25)
Four sets of corner plates with bolt heads. Each set is in two parts with bevelled edges along the joint (up the corner). Enough for one wagon. 110mm long.
